CALL US: 1-510-548-6888
Map Us:
​1045 Ashby
Avenue
Berkeley CA
94710
Hours
Store
People
PocketWizard to Nikon Remote Camera Cable  N10-ACC PRO
PocketWizard to Nikon Remote Camera Cable  N10-ACC PRO

PocketWizard to Nikon Remote Camera Cable N10-ACC PRO

By: Pocket Wizard

N10-ACC

$29.99
Out of stock. Please call if you have questions: 1-510-548-6888

Product Description

PocketWizard to Nikon Remote Camera Cable N10-ACC PRO

Pre-Trigger Remote Cable
For connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to to a Nikon D200 or D100 with MB-D100 power grip. Cable length: 3' (91.5 cm) From: 1/8" (3.5 mm) stereo miniphone To: Nikon 10-pin remote shutter release terminal.
PocketWizard Compatibility:
  • PlusX
  • Plus III
  • FlexTT5
  • MultiMAX with ACC port to a Nikon 10-pin remote shutter release terminal
  • Use the N90M3-P or N90M3 for the Plus II, older MultiMAX, or other PocketWizard radios.


Description:
This is a special remote shutter release cable called a Pre-Trigger Cable. A Pre-Trigger cable controls both the half-press and full-press function of your remote camera’s shutter release. When a camera is “pre-triggered”, it is like holding your camera’s shutter release button in the half-pressed or metering/focusing position. This –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions.

Compatibility with the following Radios:
  • PlusX: Use this cable with the PlusX to trigger the camera. Plus III: Use this cable with the Plus III’s exclusive 2-stage trigger to wake-up or focus your remote camera just like using the camera’s shutter release button.
  • FlexTT5: This cable is required for relay mode with E-TTL, or other remote triggering with the FlexTT5. Learn more here. You can use a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. The FlexTT5 does not support the 2-stage trigger function.
  • MultiMAX with –ACC port: Enable a remote zone with your hand-held MultiMAX, and your remote MultiMAX will wake up its remote camera with this cable. As long as the zone is turned on, the remote camera will stay awake and respond more quickly and consistently, but also consume the camera's batteries much more quickly. When the remote zone is disabled, the camera will enter its normal sleep modes. The MultiMAX does not support the 2-stage trigger function.


Compatible with cameras using Nikon's 10-pin remote terminal including:
Nikon D200 Nikon D100 with MB-D100 power grip This cable will also work on most other Nikon 10-pin remote terminal cameras but N10-ACC (formerly the N90M-ACC-ND) is recommended. Will not work for D700, D800, D800E or D4. Use N10-ACC (formerly the N90M-ACC-ND) instead.


Visit us

1045 Ashby Avenue
Berkeley, CA 94710

  • M-F: 10am-6:30pm
  • SAT: 10am-6pm
  • SUN: 10am-4pm

510-548-6888



Follow Us

  • Facebook
  • Flickr
  • Twitter
  • Google+
  • Instagram