CALL US: 1-510-548-6888
Map Us:
​1045 Ashby
Avenue
Berkeley CA
94710
Hours
Store
People
PocketWizard MiniTT1 Transmitter for NIKON
PocketWizard MiniTT1 Transmitter for NIKON PocketWizard MiniTT1 Transmitter for NIKON

PocketWizard MiniTT1 Transmitter for NIKON

By: Pocket Wizard

PW-MINI-N

$169.99
Hurry, only 1 left in stock!

Product Description

PocketWizard MiniTT1 Transmitter for NIKON

With its low profile design, you can use the MiniTT1 Transmitter on camera to trigger remote i-TTL / CLS speedlights or studio flashes attached to FlexTT5 Transceivers.

Place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The MiniTT1 is compatible with any PocketWizard radio for triggering manual flash or remote cameras.

Specifications:
  • Firmware: 3,800
  • Nikon i TTL compatible
  • Frequency:340.00 - 354.00 MHz US FCC / IC (North America)
  • Channels: 52 Channels over 26 Frequencies (FCC/IC) / 35 Channels over 5 Frequencies (CE)
  • Internal antenna
  • Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
  • Range performance: Up to 10 to 240 meters (30 to 800 feet) for E-TTL triggering. Up to 10 to 365 meters (30 to 1200 feet) for basic triggering. Range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference.
  • Hot shoe mounting only
  • Max shooting range frames per second: TTL Mode: within 1 FPS of camera's maximum FPS Basic Trigger Mode: Camera Max FPS * dependent on flash power settings FPS = Frames Per Second
  • Power / channel switch: OFF - C.2 - C.1
  • Zone select switch: A-B-C (matches Nikon zones)
  • Status indicator: LED: Green, Amber, Red status indications
  • Voltage present: 3.3 VDC (all pins) - safe for all cameras
  • Hot shoe voltage protection: Hot Shoe: up to 50V
  • USB Compliant 2.0, Mini-B Connector
  • Operating Temperature: Above -15° C (5° F) and below 50° C (120° F)
  • Storage temperature (without battery) : Above -30 C (-22 F) and below 85 C (185 F)
  • Construction: High impact plastic, captive battery door Hot Shoe made of glass reinforced resin
  • Power: 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coiin cell type
  • Battery Life: 30 - 50 hours of camera "awake time" depending on shooting habits
  • Dimensions: 2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall
  • Weight: 2.3 oz (65 grams); 2.0 oz (57 grams) without battery
  • In the box: MiniTT1 Transmitter, USB cable, CR2450 battery, Quick Guide


Visit us

1045 Ashby Avenue
Berkeley, CA 94710

  • M-F: 10am-6:30pm
  • SAT: 10am-6pm
  • SUN: 10am-4pm

510-548-6888



Follow Us

  • Facebook
  • Flickr
  • Twitter
  • Google+
  • Instagram